7
4 3/4" O.D.
3/8"
3 11/16" I.D.
10"
4"
14"
9"
11 1/8"
3 11/16" Dia.
9
9
14
1
12
13
11
10
5
3
4
16
15
2
6
TOP VIEW
Lytespan
®
Accent Lighting System
8603WH
Page 1 of 1
LyteJacks Recessed Power Jack
Job Information
Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier
a Genlyte Thomas Company
www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division) • A0902
Features
1. Plug Housing:
Aluminum die-casting provides support for the plug jack and
canopy.
2. Plug Jack
: Molded high heat resistant polymer. Accepts all LyteJack
fixtures.
3. Magnetic Transformer
4. Transformer Housing:
Aluminum sheet metal provides maximum heat
dissipation.
5. Thermal Protector
6. Thermoplastic Canopy:
Integral color, snaps onto plug housing, covering
the mounting plate. Exposed surface of canopy is treated to receive water
base paint.
7. Centering Bushing:
Unscrew and remove when using any StyleJack
8. Mounting Plate:
Galvanized steel, supports plug housing on mounting
frame.
9. Top Mounting Plate
10. Splice Box Cover
: Opens easily, pivoting on a lower hinge. Allows access
for making and inspecting splices, snaps shut.
11. 5/16” Dia. X 20” Metallic Greenfield
12. 90° Fitting
13. Anti-Short Bushing
14. (2) 8-32 Screws:
Secures plug housing to mounting frame.
15. Splice Box and Mounting Frame:
Galvanized steel.
16. Mounting Bars:
Steel bars slide open, extend to 27”.
Electrical
Low voltage (12V) magnetic transformer contained in an aluminum housing,
120V, 60Hz. input. Complies with UL and National Electrical code requirements
for type Non-IC installation. Rated for through branch circuit wiring. Maximum
of 8 (4 in - 4 out) No. 12, Min. 90°C supply wires.
Dimming
Use only dimmers specially rated for inductive loads (low voltage fixtures
equipped with magnetic transformer) such as Lightolier Lytemode, Scenist, and
Compli systems and Lightolier dimmers carrying the suffix VA.
Labels
UL; I.B.E.W.
Catalog No. Finishes
Mounting
Use With
8603WH
Matte White
Installs in new ceiling construction.
Any Focal Jack or LyteJack fixture with
Max. ceiling thickness 1 1/2”. Insulation must be
12V, 50W to 75W Lamp
8613WH
Matte White
kept 3” away from fixture sides and wiring
Any Focal Jack or LyteJack fixture with
compartment and must not be placed above fixture
12V, 20W to 50W Lamp
so as to entrap heat.
8603WH
8613WH
