INSTALLATION INSTRUCTIONS
3
NO.
LC004950
WARNING
This pre-lit tree is for INDOOR use ONLY. The tree stand must be placed on a flat rigid surface.
• Do not operate this product whilst in packaging.
• Disconnect from the mains supply when not in use.
• Do not operate in a confined space or allow to come into contact with any flammable materials.
• Do not allow any part of this set to come into contact with direct heat or flame.
• The transformer is a sealed unit, do not attempt to open or tamper with it.
• There are no user replaceable parts to this product.
• Please keep a free flow of air around the transformer.
6
ON/TIMER/OFF
Insert the plug into your wall outlet to illuminate the
tree. Press the button once to turn on the tree with no
timer. Press the button again to activate the 6-hour
timer. Once set, the tree will turn on and off at the
same time each day. Press the button a third time to
turn off the tree. NOTE: The LED lights are sealed units
and not user replaceable.
5
CONNECT POWER SOURCE TO TREE
Carefully move the tree to your preferred position
(ensuring that it is positioned on a rigid and level
surface). Connect the wire coming from the tree to the
transformer and ensure the gasket is secured tightly in
place.
Transformer
ON/TIMER/OFF
Control box