Section 2
Initial Setup
8
Setting Dusk / Dawn Time
Although the iTimer calculates the precise dusk and dawn times for your location, you
may prefer your lighting to come on slightly before sunset (dusk) or slightly after.
Similarly, you may prefer the lights to go off just after sunrise (dawn) or just before.
You can easily modify the Dusk and Dawn times to suit your preference using the
Dusk/Dawn menu.
From the clock page, navigate to the ‘Set Dusk/
Dawn’ menu by pressing the “
OK
” key then
pressing the DOWN key 4 times followed by
“
OK
”. The display will change to show …
Use the UP / DOWN and OK keys to advance or
retard the DUSK and DAWN time by as minutes
as required. E.g setting Dusk time to +15minutes
will add 15 minutes to the calculated dusk time,
thus bringing the lighting on 15mins later. It is
possible to adjust the time negatively too, to
bring lighting on/off earlier than calculated.
9
ADJUST DUSK / DAWN
Dusk: 16:39
+0 mins
Dawn: 07:01 + 0mins
BACK
ADJUST DUSK / DAWN
Dusk: 16:39
+0 mins
Dawn: 07:01 + 0mins
BACK