Section 7
Security
System Code
The Light Symphony system has a potential wireless range of several Kilometres
(using repeater units) so it is important to avoid interference with neighbouring
systems. For this reason a ‘System Code’ is employed which can be set from 1 to
32. Systems set with different codes will not interfere with each other.
The Lighting Control Modules adopt the System-Code from the remote control that
is used to program them. By default the Remote control System-Code is set to 1,
but can be changed by following the instructions that came with it.
If the Remote-Control and therefore Lighting Control Module’s System-Code has
been changed then the iTimer must be configured to match.
Press the “
OK
” key to enter the ‘Set System code’ menu. The display will change;
Adjust the System Code as required then navigate to the BACK field to return to
the main menu.
21
SET SYSTEM CODE
SYSTEM CODE:
1
BACK