1. Introduction
DVIDL-OPT series – User's Manual
5
Thank You for choosing Lightware’s DVIDL-OPT series extender devices. In
the first chapter we would like to introduce the device highlighting the most
important features in the below listed sections:
ç
ç
ç
ç
ç
1.2.
Box Contents
1.3.
Compatible Devices
Transmitter
The DVIDL-OPT-TX200 transmitter is compatible with the following
receiver and input board:
▪
DVIDL-OPT-RX100 receiver;
▪
MX-FR modular frames with MX-DVIDL-OPT-IB-NT card.
Receiver
The DVIDL-OPT-RX100 receiver is compatible with the following
transmitter and output board:
▪
DVIDL-OPT-TX200 receiver;
▪
MX-FR modular frames with MX-DVIDL-OPT-OB-NT card.
DVIDL-OPT Extender
5V DC power adaptor
with interchangeable
plugs
Safety & warranty info,
Quick Start Guide
Safety and
Warranty
Info
Quick
Start
Guide
1.1.
Description
Lightware DVIDL-OPT-TX200 is a Dual-Link DVI optical transmitter and
DVIDL-OPT-RX100 is a Dual-Link DVI optical receiver. The appliances
are suitable to extend single- or dual-link video signals through a
single multimode fiber optical cable. The appliances are assembled
with Durable Neutrik opticalCON fiber connector, which also accepts
cables with LC connectors.
Front panel shows immediate feedback about the status of connected
source signals and displays devices. Transmitter contains a local DVI
OUTPUT connector, which helps to check the image extended on the
fiber optical cables on transmitter side. Advanced EDID management
is available by the rotary switches on the transmitter. The extenders
have USB port for certain remote control applications and firmware
upgrade.
Model Denomination
About the Serial Number
Lightware devices contain a label indicating the unique serial number
of the product. The structure is the following:
DVIDL-OPT-TX200
Supported video signal
TX
: Transmitter,
RX
: Receiver
Transmission channel
Number of video outputs
7A000941
Year of the manufacturing (3-9, A-Y):
7=2017, 8=2018, 9=2019, A=2020, etc...
6-digit running sequence number
Month of the manufacturing (1-9, A-C):
1=January, 2=February, ..., C=December
