6. Software Control – Using Lightware Device Controller
MX2-8x8-HDMI20 series – User's Manual
33
6.7.
Advanced View
Advanced view is the surface for displaying the LW3 protocol tree. Commands and specific parameters
(which are not available on the graphical user interface of the LDC) can be run and set by the controlling
tools.
2
4
1
7
6
5
3
1
LW3 Protocol Help
Short description about the command types and LW3
Protocol. (
is a brief
summary)
2
Terminal Window
Commands and responses. Sent command starts with
">"
character, received response starts with
"<"
character.
The content of the window can be emptied by the
Clear
button. If the
Autoscroll
option is ticked, the list is scrolled
automatically when a new line is added. Place the mouse
cursor on a line to display the date and time stamp in a
Hint field.
3
Protocol Tree
LW3 protocol tree; select an item to see its content.
4
Edit Mode
The default appearance is the
Edit mode
. If the option is
unticked the values or parameters cannot be changed.
5
Node List
Parameters and nodes of the selected item are shown.
6
Warn Option
The LDC can be set to warn the user before enable the
Edit mode
.
7
Command Line
Type the desired command and execute it by the
Send
button.
