Page 22 / 53
Control commands:
Legend
:
xx*
=
input number in 2 digit ASCII format (01,05,07 etc.)
yy*
=
output number in 2 digit ASCII format
CrLf =
Carriage return, Line feed (0x0D,0x0A)
=
space
character
(0x20)
1. Switch one input to one output ( Audio / DVI / RGB / SDI / Video)
Command {xx@yy}
{01@05}
Response (Oyy Ixx)CrLf
(O05
I01)CrLf
Description:
Switch input xx to output yy.
Example:
Connect input 1 to output 5.
2. Switch one input to all outputs ( Audio / DVI / RGB / SDI / Video)
Command {xx@O}
{01@O}
Response (Ixx All)CrLf
(I01
All)CrLf
Description:
Switch input xx to all outputs.
Example:
Switch input 1 to all outputs.
3. View connection on the specified output ( Audio / DVI / RGB / SDI / Video)
Command {?yy}
{?05}
Response (Oyy Ixx)CrLf
(O05
I01)CrLf
Description:
View connection on output yy.
Example:
View connection on output 5.
4. View connection on all outputs ( Audio / DVI / RGB / SDI / Video)
Command {VC}
Response (ALL O1 O2 O3 O4 O5 O6 O7 O8)CrLf
Description:
Response length depends on the number of outputs installed in the
router. The response above suppose a router having 8 outputs. Indexes show the
actual output and the number at the given index shows which input it is connected
to. If value O5 equals 04 it means that output 5 is connected to input 4.
O1..O8 are two digit ascii characters. (01, 02, 04, etc.)
Example:
View connection on all outputs
Command {VC}
Response (ALL 01 02 03 04 05 06 07 08)CrLf
Legend:
output 1 is connected to input 1, output 2 is connected to input
2...output8 is connected to input 8, this is the so called „diagonal pattern”.
Summary of Contents for MX 8x8 DVI Pro
Page 1: ...MX 8x8 DVI Pro User s Manual ...
Page 4: ...Page 4 53 ...
