The LightwaveRF Connect 5 Button Remote is
designed to control LightwaveRF Connect CFR
remote control bulbs or any other remotely
controllable products in the range.
SETUP:
The functions illustrated here relate to the operation
of a dimmable CFR. For information regarding how to
pair the remote to the relevant receiver/s please refer
to the setup instructions for that individual device.
Before operation, ensure that the plastic film isolating
the battery is removed.
NOTE: If the RF distance between the transmitter and
receiver is too great to achieve reliable operation, the
LightwaveRF Connect SIGNAL BOOSTER may be
used in conjunction with this product to increase the
signal strength over greater distances.
OPERATION:
To operate a dimmable CFR
NOTE: If operating a CFR, make sure that the wall
switch is initially turned ON .
Switch ‘ON/OFF’
There are two sets of ‘ON/OFF’ buttons. You can
choose to pair either set of buttons (see instructions
of the receiver device to pair it).
