• Press the ‘ON’ button once to
switch paired devices on.
• Press the ‘OFF’ button once to
switch paired devices off.
• Press the ‘ALL OFF’ button once
to switch off all paired bulbs.
Dimming down
1. Make sure the light is switched
on.
2. Hold down the ‘OFF’ button on
the remote.
3. After 1 sec. the light will start to
dim down.
NOTE: If the ‘OFF’ button is not released, the light will
continue to dim until no light is emitted and stop,
although the switch remains on, illustrated by the
illuminated blue LED.
Raising Dim Level
1. Make sure the light is switched on.
2. Hold down the ‘ON’ button on the remote.
3. After 1 second the light will start to become
brighter.
4. At the desired brightness release the ‘ON’ button.
NOTE: If the ‘ON’ button is not released, the light level
will increase until it stops at the maximum possible
level of brightness