2 x AAA batteries can be inserted under the battery
cover at the rear of the device. This can be removed by
pulling down on the catch and gently unhooking the
cover from the hooks at the base of the unit.
IMPORTANT:
In the battery compartment there is a
slider switch marked A/B. Setting the switch to
position A causes an ‘off’ command to be sent when a
window or door is opened. Setting it to position B will
cause an ‘on’ command to be sent.
Inserting the batteries
Attaching to a door or window and frame
The Magnetic Trigger can be attached to a window frame
using adhesive pads provided or by using suitable screws
inserted through the mounting holes in the back cover.
IMPORTANT:
When mounting, the two dots on each
sections must line up vertically with no more than
2-3mm between the sections (as in the picture). The two
dots also need to be within 10mm of each other in terms
of depth. The indicator LED will light up on opening /
closing if the sections have been mounted correctly.
2-3mm
Installation
