Operation
Switching the product on and off
22
23
− Select the required sensor area by turning the motion
sensor housing.
Setting the lighting duration
1. If necessary, turn the motion sensor housing
10
to reach
the TIME controller
4
.
2. Select the desired lighting duration between approx.
10 and 60 seconds by turning the controller in the
corresponding direction:
− Turning the TIME controller clockwise increases the
lighting duration.
− Turning the TIME controller anticlockwise decreases
the lighting duration.
Setting the sensitivity
You can specify at what brightness (e.g. from dusk) the motion
sensor reacts and switches on the product.
1. If necessary, turn the motion sensor housing
10
to reach
the LUX controller
2
.
2. Choose the desired sensitivity by turning the controller in
the corresponding direction:
− Turning the controller clockwise increases the sensi-
tivity so that the motion sensor
11
will react even in a
bright environment. If the controller is on the sun sym-
bol, the motion sensor reacts 24 hours a day, regardless
of the ambient light.
− Turning the controller anticlockwise decreases the
sensitivity so that the motion sensor will only react in a
darker environment. If the controller is on the crescent
moon symbol, the motion sensor only reacts when it is
night.
• Whether the motion sensor reacts depends on
the speed at which the object is moving.
The sensor will not react to movements that
are too fast or too slow.
• Electrical sensors are more sensitive in cold,
dry weather conditions than in warm, humid
climates.
Adjusting the spotlight heads
You can rotate the spotlight heads
12
90° to the left and to
right. You can also move each of the spotlight heads approx.
60° downwards and approx. 90° upwards (see
Fig. E).
− If necessary, remove the tab
1
if you want to align the
two spotlight heads individually. Then align the spotlight
heads as you like (see
Fig. F).
Aligning the solar panel
− Align the solar panel
15
so that optimum charging is
ensured (see chapter “Selecting the installation location”).
Switching the product on and off
To switch the product on, set the power switch
5
to the
different setting possibilities:
Position
Function
I
The spotlight switches on at full luminosity once
the motion sensor is activated. The spotlight
then switches off automatically afterwards.
O
Switch off the spotlight. The rechargeable
batteries can be recharged.
