ISG Allegro LightWise USB 3.0 Technical Manual Version 1.3.1
29
GenICam User Set Control
Camera Firmware
Firmware is programming that is inserted into the programmable memory (programmable ROM) of ISG
cameras. Firmware is created and tested like software. When ready, it can be distributed like other software and
installed in the programmable memory by the user.
The latest firmware versions often include significant bug fixes and feature enhancements. To determine the
changes made in a specific firmware version, consult the Release Notes.
Firmware is identified by a version number, a build date, and a description.
Determining Firmware Version
To determine the firmware version number of your camera:
1. In the ISG, open the "About" Dialog.
2. Query the GenICam feature DeviceFirmwareVersion.
Upgrading Camera Firmware
Camera firmware can be upgraded or downgraded with either an earlier or later version by using tools located
on the ISG website.
www.isgcameras.com
Name
Display Name
Description
Value
UserSetSelector
User Set Selector Select the feature user set to load, save, or configure
Default = 0
User Set 1 = 1
User Set 2 = 2
UserSetLoad
Load Selected
User Set
Loads the User Set specified by UserSetSelector and makes it
active
Write Only
UserSetSave
Save Selected
User Set
Saves the user set specified by the User Set Selector to the
non-volatile memory of the device
Write Only
UserSetDefault
Default User Set Select the feature user set to load and make active by default
when the device is reset
Default
User Set 1
User Set 2
Summary of Contents for ISG Allegro
Page 1: ...Technical Manual ISG LightWise Allegro USB3 Vision Cameras Version 1 3 1 Last Revision 3 31 15...
Page 16: ...ISG Allegro LightWise USB 3 0 Technical Manual Version 1 3 1 16 Select Next Select Next...
Page 52: ...ISG Allegro LightWise USB 3 0 Technical Manual Version 1 3 1 52 11 Trouble Shooting...