ISG Allegro LightWise USB 3.0 Technical Manual Version 1.3.1
8
Imaging Performance
Sensor Image Data
A/D Converter
10 and or 12 bit in sensor
Video Data Output
8,10 and 12 bit firmware available
Image Data Formats
Mono:8 or 10 bit packed, 12 bit firmware available
Color: Bayer 8 or 10 bit packed, RGB, YCC 422
Image Processing Pipeline
(Color Models)
Bayer Interpolation, Gamma, White Balance, Color Space Conversion and Correction
Partial Image Modes
Binning and Region of Interest (ROI) Modes
Shutter
Global Shutter with Programmable Integration
Gain
Programmable Digital Gain
Digital Interface
USB 3.0 interface with screw locks for camera control, data and power
Transfer Rates
5 Gbit/s
GPIO
12-pin Hirose HR10A GPIO, opto isolated trigger, 2 opto isolated strobes
External Trigger Modes
Single Frame, Burst Mode, Bulb Mode
Synchronization
Via external trigger or software trigger
Image Buffer
256 MB Buffer
Flash Memory
8 MB nonvolatile flash memory
Dimensions
Mass
Power Consumption
5V via USB3.0 interface, maximum <4.5W
Machine Vision Standard
IIDC v 1.32, USB3 Vision v1
Camera Control
Via ISG SDK, CSRs, or third party software
Camera Updates
In-field firmware updates
Lens Mount
C-mount
Temperature
Operating: 0o to 45o C; Storage -30o to 60o C
Humidity
Operating: 20 to 80% (no condensation); Storage 20 to 90% (no condensation)
Compliance
CE, FCC, RoHS
Operating System
Windows 7, 8, 8.1
Warranty
Two Years
Handling Precautions and Camera Care
Opening the camera housing will cause damage and will void the hardware warranty detailed in the beginning
of this document. Since the LightWise Allegro Camera is a precisely manufactured device it must be handled
with care. Some tips for device care are below:
1. Electrostatic charging should be avoided
2. Avoid touching the lens when handling the camera, as fingerprints will affect the quality of the image
produced by the device.
3. When cleaning the lens do not use excessive force and please use a standard camera lens cleaning kit or
clean dry cotton cloth.
4. Avoid exposure to bright sunlight, dusty environments, rain etc. as this may cause problems with the
electronic and optics of the system.
5. Mishandling of the device such as excessive shaking, dropping and force should be avoided.
Summary of Contents for ISG Allegro
Page 1: ...Technical Manual ISG LightWise Allegro USB3 Vision Cameras Version 1 3 1 Last Revision 3 31 15...
Page 16: ...ISG Allegro LightWise USB 3 0 Technical Manual Version 1 3 1 16 Select Next Select Next...
Page 52: ...ISG Allegro LightWise USB 3 0 Technical Manual Version 1 3 1 52 11 Trouble Shooting...
