Technical Description &
Configuration Guide
Configuration
and Management
LigoWave
Page 27
Figure 22
– STEP 5. Checking settings and executing configuration
To verify the settings, we can go to
Status
or the main screen, which is the first option in the
nav
igation panel. If there are no „red fields‟, everything is set correctly and the link is up.
Command Prompt Interface
The LigoPTP 24 equipment can be monitored and configured by using command interface described
in this chapter.
This process is performed by connecting to the Telnet terminal via the Ethernet management port; the
Telnet management supports only one client.
The command line management interface offers the widest configuration and monitoring functionality.
The available commands for Telnet management are found in detailed explanation of Web GUI
windows, as well as in tables of additional commands.
−
To end Telnet session press Ctrl+D. Opening the session again, the prompt will appear
to enter username and password.
− For default (factory) usernames and passwords please refer to chapter
Configuration
File
.
Syntactic notes for command prompt commands
Commands are in
bold
font.
All arguments (variables) are in
italic
font.
Subcommands and keywords are in regular font.
Arguments in square brackets ([ ]) are optional but required arguments are in angle
brackets (<>).
Alternative keywords are grouped in braces ( {} ) and separated by vertical bars
( | ).
The usage of each command is displayed if the command followed by t
he “?” (or any
unrecognizable string) is entered, e.g.,
radio ?
The management system is automatically restarted if it freezes. This is performed by the
watchdog timer. Restarting of the management system does not affect (interrupt) the
E1/Ethernet traffic.
