6
4. Calibration
Click “Calibration” and the whiteboard will be in calibration interface as follows:
Step 4
Vertically touch the centre of the flashing “+“ with the interactive whiteboard pen tip until the flashing
“+“ move to the next calibration point and thus one point is calibrated. Follow the instructions in the
calibration interface and complete the calibration of other points thus the interactive whiteboard
calibration is finished.
Notes
• Calibration with a finger might lead to inaccurate calibration. Calibration with the pens will gain
a better effect.
• Wrong calibration may lead to whiteboard not working and this requires recalibration.
• Pressing “ESC” during calibration can cancel the current calibration operation.
• There are minor differences between the calibration interface of different version softwares. The
calibration, however, is very much the same. For products with shortcut keys, there are shortcut
key calibration and you just need to follow the instructions.
• When a laptop pc with windows system connect a whiteboard touch screen, and set the projec-
tion mode as “Duplicate” mode, in some resolution, the laptop may can’t get full screen display,
then the calibration a ccuracy in the whiteboard touch screen will not be accurate too, so please
select. Others resolution which can be displayed fully by the laptop pc to avoid this problem.
