19
Step 3
Press power switch on the interactive panel or
on the remote controller to turn on the
interactive panel. In this case, the indicator is in green
.
Press
PC Power
on the front panel to
power on the OPS (for all-in-one models only).
3.2
Power off
Standby status: When the interactive panel is in running status, press
Power
or
on the remote controller. The interactive panel enters in standby status. When the
OPS is in running status, Press
PC Power
on the front panel. The OPS enters in
standby status (for all-in-one models only).
Power off: Turn off the rocker switch at the bottom of the interactive panel (next to
the power port) or pull out the power plug to switch off the interactive panel
completely.
For all-in-one models, turn off the OPS before powering off the interactive panel.
If the PowerKey Turn On PC is enabled, you do not need to press PC power to control the OPS
during the power-on and power-off processes.
Status of the power indicator is as follows:
Power Indicator
Status
No light
Powered off
Red
Standby
Green
Powered on
3.3
Software Installation
Recommended configuration
−
CPU: Inter (R) Core i3 2.27GHz or AMD CPU with equivalent performance
−
Memory: 1GB
−
Hard drive: 1GB
