LIKE IT
46
EN
5.2.5- The door will open and close automatically to map the open
and close sensitivity force requirements.
5.2.6- It displays " " to show setting is complete.
I I
If you see the
symbol " - " it means that the setting position wasn't saved. See
the possible solution in Chapter 6.2 "Troubleshooting".
5.4.3- Repeat the previous steps to code a maximum of 20 different
remote controls and/or wireless push buttons.
5.4.1- Press button
CODE
, it displays " ".
5.4.2- Press two times the button desired on the remote control or on
the wireless push button, " " flashes.
5.3.1- When the unit has stored 20 codes, it flashes "
F
" (memory
full), you should not store more codes.
If you need to store more than 20 codes, you will need to use an
external receiver.
5.3.2- Press and hold button
CODE
more than 8 seconds, it displays
" ". After the 8 seconds it flashes "
C
", all the codes were cancelled.
5.4 Adding or changing remote controls and/or wireless push
buttons
5.3 Remote control – full capacity & erase stored codes
5.5.1-
Press and hold button
SET
pressed, until it displays "
3
", and
as soon as you release the button, it shows the number relative to
the current level of Force ("
1
" or "
2
"). The default setting is "
2
".
5.5.2- Now that it is showing the current situation, press button
UP
to
increase the force one value, or press button
DOWN
to decrease
one value. The maximum value is
2
and minimum is
1
.
" "
" "
5.5 Force adjustments
(if necessary)
Summary of Contents for PRO1200
