background image

9

TROUBLESHOOTING

Light does

not work

Fan does

not seem to

move much

air

Fan wobbles

or shakes

excessively

·   Wires are not properly connected.

·   Light bulbs are faulty.

·   Fan is in reverse (blades are moving in

    clockwise direction).

·   Fan is not properly located.

·   Screws securing fan blade clips to motor

    are loose.

·   Fan blade and its blade clip are not

    fastened securely.

·   Canopy and mounting bracket are not

    tightened securely.

·   Ensure wire connector in switch

    housing is connected.

·   Unscrew light bulbs and discard

    properly.

·   Counter-clockwise (forward) is

    recommended in warm weather.

    rotation to stop. Use the eraser end

    of a pencil to change the forward/

    reverse slide switch.  

·   Place fan in the centre of the room

    so there is at least 12" (30 cm)

    between the end of the blades and

    walls or other obstructions.

.   Make sure that screws which attach

    fan blade clips to motor are fastened

    and tightened.
.   Tighten screws of fan blade to blade

    clip securely.

.   Ensure that canopy and mounting

    bracket are tightened securely to

    ceiling joist.

ENVIRONMENTAL PROTECTION

Discarded electrical appliances are recyclable and should not be discarded in your regular

domestic waste! Please actively support us in conserving resources and protecting the

environment by returning this appliance to a collection centre (if available).

Battery reclamation (please keep to comply with the local law).

Problem

Possible reason

Solution

Summary of Contents for 052-4328-4













Reviews: