85
Preventative Maintenance Viking XL
www.liko.com
10.0
Instructions regarding the check points
4 Pivot bolts
Lubricate inner side
ZLWKÀRXUÀRQ37)(
grease.
Remove pivot bolt, inner and outer bearing sleeves and hardware.
Clean and lubricate pivot bolt, inner and outer bearing sleeves.
Inspect plastic cover, clean them if necessary.
Flat side down
5 Base opening and closing linkage
x2
Remove hardware covers from middle beam and actuator.
Remove leg from middle beam and actuator.
(a) Remove pivot bolt, inner and outer bearing sleeves and hardware.
(b) Remove link arm cover, bolt and nut.
Remove plastic covers and inspect middle beam edges for burrs. File smooth
if required.
Clean and inspect the three pieces of plastic cover. Replace if cracked or
deformed. (For Spare Part No see the Spare Parts List)
Clean, lubricate and reassemble pivot bolt, bearing sleeves and hardware.
Tighten pivot bolt and apply plastic hardware covers.
Reconnect actuator to link arm. Apply plastic hardware covers.
Viking XL
Viking L
Viking M
Leg covers needs to be replaced after:
612 Ah
546 Ah
420 Ah
or
Replace according to years in use:
6
6
6
Summary of Contents for Viking XL 2040003
