8
© Copyright 2003-2017 LILY by Mota Group, Inc. All rights reserved
Replacing the Propellers
The propellers must be replaced with ones that spin in the same direction. Propeller blades
with an “H” on top must be replaced with ones that also have an “H”. Blades with a “G” on
top must be replaced with ones that also have a “G”, as in the above figure.
How to replace propeller blades:
Use a wrench or a screwdriver to loosen the screws, remove the old ones and mount the
new ones onto the base, as shown in the following figure:
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Please ensure that the propeller is tightly screwed in, to prevent the screws coming
loose and the blades coming off during flight. They need to be re- tightened after
every 10 hours of flight.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Battery
The battery is designed specifically for use with Lily Next-Gen. It has a rated capacity of
1650mAh and a nominal voltage of 11.4V.
Using the Battery
Please insert the battery into the battery compartment before using Lily.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
◎
Please don’t remove the battery while the aircraft is turned on.
◎
Battery overheating may affect the performance of the drone. Do not use it in hot
environments (over 40°C / 104º F).
◎
If the battery leaks, emits an odor, generates heat by itself, changes shape
(swells, etc.), changes color or shows any other abnormalities during use, charging
or storage, please remove the battery immediately and dispose of it safely.
◎
Do not use the battery in cold environments (under 5°C / 41º F), or it may cause
irreversible damage. When the temperature is low, the battery’s usage time may
drop. Please warm it up to 5°C or higher before plugging it into the aircraft, 20°C /
68ºF or higher is better.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
