66
MECHANICAL SAFETY DEVICES
1. This mixer is designed to prevent getting body parts trapped or burned during the following
procedures:
•
When filling and discharging.
•
When drum is rotating when full or empty.
•
When switching motor off.
•
When transporting or lifting mixer with crane. No mixer components represent danger when
handling.
•
All bolts are secured using lock nuts (DIN 985) with washers.
2. Motor housing and plug socket are secured with steel bars welded onto housing. Housing is also
protected against falling objects and impact.
3. Tipping mechanism is designed to always lock in „locked“ position. This guarantees safe operation
(mortar production, maintenance, discharging, transport). If the drum stops at any other position,
the mechanism always ensures it is moved to locked position.
ELECTRICAL SAFETY PRECAUTIONS
FAILURE TO COMPLY WITH THESE INSTRUCTIONS CAN CAUSE DEATH!
NB:
Protection insulated machine. Protection class II can only be maintained if original insulating
parts are used for repairs and insulation distances are not changed.
Power supply cable shall comply with IEC 245-4:1980 (DIN 57 282) with designation H 07 RN-F or
equivalent types. Cable cross-section shall be min. 3x1.5mm
2
up to max. 25 m length. Cable cross-
section from this length min. 3x2.5 mm
2
. Cable must be resistant under hard conditions, protected
against mechanical failure and fully protected against contact with water. Cable must always be checked
before use and fulfill the first two points in full. Never use defective cables.
Arrange cable to avoid it getting trapped or exposed to violent pulling and ensure that short circuiting
will not occur at sockets due to foreign objects of earth. Do not use temporary electrical connections.
Protective measures must never be bypassed or deactivated in any other way. Repairs to electrical
connections may only be performed by an electrician who must comply with the aforementioned norms.
Repairs to electrical parts may only be performed by the manufacturer or an appointed representative.
In the event of power cut, the machine will switch off automatically. Switch machine on again by
pressing switch.
ENGLISH
INSTRUCTION MANUAL
Summary of Contents for 80053
Page 87: ...87 ILLUSTRATION ...
Page 88: ...88 PART LIST ...
