67
MOTOR PROTECTION SWITCH
The motor is fitted with an automatic thermal switch. If motor is overloaded, it will overheat and the
thermal switch will automatically switch it off. Before re-starting, allow motor to cool (press switch).
In the event of power cut, the machine will switch off automatically. Switch machine on again by
pressing switch.
Despite correct use and compliance with all safety instructions, there will still be other risks due to the
construction, depending on use. Danger from electricity if appropriate power cable is not used. Damage
that can involve risk from conductive parts or mixer itself. Danger due to rotating and moving parts or
drum. Particularly if instructions for operation, maintenance and repair are not followed. Such risks can
be minimised if the instructions under „Safety instructions“ and „Correct use“ are followed.
ADDITIONAL SAFETY INSTRUCTIONS
•
Check all protective precautions are in order and that all parts are correctly fitted.
•
Check that safety instructions have been read, understood and remembered.
•
On/off switch is in same housing as plug socket. Both parts are connected to motor housing.
Switch is protected against contact with water.
PREPARATION FOR USE
READ ALL SAFETY INSTRUCTIONS
USE
NEVER SWITCH MIXER ON WHEN DRUM IS FULL
ALWAYS CHECK WHETHER DRUM IS FULL OR EMPTY BEFORE USE!
•
Ensure mixer stands on a firm, flat surface. An uneven surface can cause mixer to tip over.
•
Keep area around mixer tidy to prevent accidents. Ensure good lighting.
•
Keep other personnel away from area around mixer.
•
Persons under 16 years of age may not operate mixer.
•
For use only for purposes stated under „Correct use“.
•
Mixer and its components must not be modified. Replace defective/damaged parts with original
parts only. Do not use unless all protective measures are in place and working. All warnings and
safety instructions on mixer must be completely visible and undamaged.
Check mixer is standing securely. Ensure mixer drum cannot discharge by accident when setting up.
ENGLISH
INSTRUCTION MANUAL
Summary of Contents for 80053
Page 87: ...87 ILLUSTRATION ...
Page 88: ...88 PART LIST ...
