69
Fig. 1
Fig. 2
Fig. 3
Fig. 4
TRANSPORT INSTRUCTIONS
CAUTION!!!
Disconnect power cable before transporting.
Not suitable for road transport. Must be transported on a suitable vehicle. Must be moved manually or
by crane on building sites.
Preparation for transport or moving:
(Set hand wheel to position 4 on position disk in both instances)
Set mixer in transport position (fig. 1,2,3,4), and transport on a suitable vehicle. When lifting by crane,
use lifting points (see pos. 1 and 2 on fig. 3 and 4). Lifting ropes/straps must have a load capacity of
200 kg. Lifting must be performed in accordance with regulations for building sites and such objects.
CLEANING
Disconnect from mains electricity before cleaning.
Do not use water for cleaning when motor housing is open.
Set mixer drum in position 3 using hand wheel. Switch off and disconnect from mains when cleaning
requires direct contact with mixer, even when using implements. Use a scraper and steel brush for
internal cleaning of drum and rinse with water. Remove concrete and mortar deposits from gear collar.
Machine must be switched off during cleaning. Do not spray water on motor housing and switch. This
also applies to ventilation slots for motor cooling.
ENGLISH
INSTRUCTION MANUAL
Lifting rope
Sections 1 and 2.
Summary of Contents for 80053
Page 87: ...87 ILLUSTRATION ...
Page 88: ...88 PART LIST ...
