6
Chapter 3 Precautions before the Operation
of limHD200i
In this chapter we will describe some problems you might have and demonstrate precautions when
using the
limHD
200i. Also some operating skills are covered.
3.1 Buttons
In case there are malfunctions of your remote control, the device is designed with commonly
used function buttons on the top. Suggest using the remote control for operation in your
daily time.
3.2 Set the Video Output Mode
When you use
limHD
200i for the first time (The factory Default Video Output Mode
Settings might do not match your display devices), or when you need to change your display
devices (the Default Factory Video Output Mode Setup might not match the newly changed
display devices), if there is abnormal display, please adjust the Video Output of
limHD
200i
by selecting the Video Mode button on the remote control. Press
button
and
alter the Video Output to normal display. Then press
button
and enter the
System Setup Manu, adjust the Video Output Mode. The system will automatically save
your settings after exit from the Manu.
3.3 U
pdate when changing the newly connected USB devices
When the
limHD
200 is in its normal operation and you need to change the USB
devices.
For instance:
¾
Disc changing of USB DVD DRIVE. Press
to unmount the USB DVD
DRIVE, change the disc.
¾
External USB HDD changing.
… …
After the above operations finished, you need to back to the main page (press
or