29
z
Take out the battery if you do not use the remote control for a long time, in case that it
might lead to damages caused by battery leak and erosion.
z
Please change all the batteries if the remote control does not work or has limited
effective ranges.
z
If there is a battery leak, please wipe clean the battery case on the remote control and
replace the old battery.
Remote Control Precautions
z
Aim the remote control at the infred sense window of
limHD
200i then operate;
z
Do not drop the remote control;
z
Do not leave the remote control in places of high temperatures or humidity;
z
Do not spill water or any other liquid to the remote control;
z
Do not expound the remote control infred sense window to direct sunshine;
z
Do not dissect the remote control.
7.2 Functions of the Remote Control Buttons
SLEEP/WAKEUP BUTTON -
When
limHD
200i is under normal working conditions,
press this button will let it enter the sleep mode, while press again it will return to normal working.
In the sleep status,
limHD
200i consumes little power.
VFD ON/OFF -
Select VFD ON/OFF
VIDEO MODE SELECTING -
Select the video output mode of
limHD
200i to
match with the display mode (resolution etc.) of the TV or other display devices. The default
video output mode of
limHD
200i might not match with your display devices. At this time your
display devices might not have normal performance or do not show. In such circumstances,
please press the VIDEO MODE button (do not press too fast, or you will miss the matching video
mode) until your display devices have normal display. After that, please use SETUP button and
enter the setup menu to adjust the video output mode right, and press EXIT button to exit. So
your settings will be then memorized and it will show normally next time when you turn on
limHD
200i. You can also adjust the video output mode by press this button during media
playing, however, it will not be autosaved.
SYSTEM SETUP -
Press SETUP button, then you can enter the system setup menu
from the browsing mode. To set up relative items and upgrade the firmware, you only need to
operate
Up
,
Down
,
Left
,
Right
and
OK
.
DISPLAY CONTROL
- Press SETUP button to adjust
Brightness
/
Contrast
/
Saturation
during
moive playback
.
