40
If your TV standard is NTSC, SD output will be set to 480i automatically; if your TV standard is
PAL, SD output will be set to 576i automatically.
Select SD Mode and press
, you may select C/S-Video
、
C/YPbPr
、
C/RGB etc in specific
circumstances. Please coordinate it with your video connection.
z
HD YPbPr
If you select HD YPbPr, please connect the display device to your
limHD
200i by YPbPr cable
with the accessory VGA-YPbPr conversion connector following the display device instructions.
limHD
200i YPbPr supports the following resolutions:
480p:
720x480 Progressive Scan Output
;
720p:
1280x720 Progressive Scan Output
;
1080i:
1920x1080 Interlace Scan Output.
9.3 System Setup
Press
on the remote control to enter setup menu. Press
, move the cursor to
System Setup
icon
. Then press
to enter the
System
Setup Sub-Menu
.