Charging
socket
closed
Charging
socket
open
Important information
|
47
46
|
The Limmex Emergency Watch
Turn the metal base of the watch case in order
to plug in the charger.
The red light on the watch face will remain lit
during the charging procedure.
The light will go out again (after approx. 1-2
hours) once the battery is fully charged.
Important: The rechargeable battery must be
fully charged before putting the watch into
use for the first time. Limmex also recom-
mends that the battery should be recharged
after every emergency or test call. Please
ensure that the charging socket is dry before
you charge the battery, otherwise this could
result in malfunctions.
2 Important information
Area of use
The area of use of your Limmex Watch is defi-
ned in your subscription manual. The Limmex
Watch may be used only within this area of
use.
The Limmex Watch operates using mobile
phone technology. Most of the inhabited areas
within your area of use will be covered. Its use
cannot always be guaranteed, however, par-
ticularly in more remote areas and in cellars,
garages, etc.
Intended use
With the exception of a monthly emergency
call test, the emergency call function of
the Limmex Watch must be used only in
emergency situations. Please refer to the
provisions in the subscription contract.
Test calls
For safety reasons, Limmex recommends that
the watch should be tested after the activati-
on of the subscription and thereafter once a
month.
Sound quality
The Limmex Watch is not designed to replace
a telephone, but to organise targeted assis-
tance in the case of an emergency. The sound
quality is at its best if you speak into the mi-
crophone from a distance of 20-30 cm.
Red light blinking
Red light on continuously
Red light goes out
Battery should be recharged
Battery being recharged
Battery charged
|
English
|
