background image

Charging so-
cket closed

Charging 
socket open

Turn the metal base of the watch case in order 
to plug in the charger.

The red light on the watch face will remain lit 
during the charging procedure.

The light will go out again (after approx. 1­2 
hours) once the battery is fully charged.

Important: The rechargeable battery must be 
fully charged before putting the watch into use 
for the first time. Limmex also recommends 
that the battery should be recharged after 
every emergency or test call.

2  Important information 

Area of use

The area of use of your Limmex Watch is defi­
ned in your subscription manual. The Limmex 
Watch may be used only within this area of 
use.

The Limmex Watch operates using mobile 
phone technology. Most of the inhabited areas 
within your area of use will be covered. Its use 
cannot always be guaranteed, however, par­
ticularly in more remote areas and in cellars, 
garages, etc.

Intended use

With the exception of a monthly emergency 
call test, the emergency call function of the 
Limmex Watch must be used only in emergen­
cy situations. 
Please refer to the provisions in the subscrip­
tion contract.

Test calls

For safety reasons, Limmex recommends that 
the watch should be tested after the activati­
on of the subscription and thereafter once a 
month. 

Red light blinking

Red light on continuously 

Red light goes out 

Battery should be recharged

Battery being recharged 

Battery charged

Important information 

11

10

The Limmex Emergency Watch

English

 | 

Summary of Contents for LM15US0001










Reviews: