BLDC50/100
User Manual
1 Introduction
Thank you for selecting the
Lin Engineering
BLD
C
5
0
/1
0
0 Brushless DC Motor Drive. The
BLD
C
5
0
/1
0
0 series DC input drives are based on advanced digital current and velocity control
technology and provide high torque, stable velocity and low noise. We hope our dedication to
performance, quality and economy will make your motion control project successful.
1.1 Features
▪ The structure is compact and the parameter is configurable.
▪
12-48VDC supply voltage.
▪
Work in velocity mode.
▪
Accept analog control signal, digital control signal,
RS-232
/485 communication command or
MMI control.
▪
High response of the PID velocity loop and D/Q current loop control.
▪
Brushless sinusoidal current control. With motor phase compensation.
▪
The drive can supply 5/10A (rms) maximum continuously current for each motor phase. And
the twice over load 10/20A is allowed for 5 seconds.
▪ With eight single-ended optically isolated inputs (5-24V) which is configurable for sinking or
sourcing by two swtiches, one analog input(0-5V, can be configured by software)and two dar
-
lington optically isolated outputs( maxium output current is 80mA).
▪ Outputs can be configured by 8 functions depending on different requirements.
Lin Engineering
BLDC 50/100 Driver Manual
Page 3
Version 1.0
01/29/2020