mod. 135GN-145GN GB
11/20
2.3
Starting
•
The appliance should set at work only after having completed the following operations:
complete assembling, connection to exhaust fumes duct and to the heating plant. A new
appliance needs to complete the drying process of the paint. During the first heatings you
can notice the following situations:
- During the first ignitions the appliance may exhale bad smell. We suggest a good
aeration of the room till bad smells have been eliminated.
- The complete drying process will be obtained after some heating operations
•
The equipment is a wood cooker with a functioning as Normative EN 12815. Thanks to
its foyer cast iron structure, the equipment has an high calorific efficiency.
COMBUSTIB LE LOADING
•
The appliance should be loaded manually during the functioning.
•
The loading of combustible should be done when the flame is minimum to avoid
combustion products or fumes outlet from the fire door.
•
To open the fire door, employ the fixture enclosed.
STARTING AND FUNCTIONNING
N.B . For starting never use : alcohol, f uel, or others liquid combustibles.
In case of starting during particular cooling days or in a condition of low pressure, it’s
advisable to heat the flue before the starting, burning inside it some pieces of papers
•
For the combustible quantities please read the “ Technical Data “ ..
IGNITION
•
To arrange on foyer a cube-lighting or a small quantity of paper, around 0,5 kg of wood
in small pieces. Open entirely the prime and secondary air, light the paper and close the
foyer door.
•
When the appliance is completely lighted, add some larger wood pieces. Repeat this
operation till when the appliance has reached the “ Hourly Charge “ as indicated in the
technical details, than regulate the prime and secondary air as indicated in the chapter
Regulations
•
The equipment should be loaded when the flame i slow to avoid fumes or combustion
products escape.
•
During equipment functioning it’s advisable to employ the ash-grater to clean the foyer
from ash and residuals.
