mod. 470-480L-490L-480N-490N GB
10/20
•
To guarantee a perfect combustion it’s
necessary to preserve the wood in a dry
and clean place.
•
The wood thermic output is related to its
humidity in %. (see the schedule ).
2.3
Starting
•
The appliance should set at work only after having completed the following operations:
complete assembling, connection to exhaust fumes duct and to the heating plant. A new
stove needs to complete the drying process of the paint. During the first heatings you can
notice the following situations:
- During the first ignitions the appliance may exhale bad smell. We suggest a good
aeration of the room till bad smells have been eliminated.
- The complete drying process will be obtained after some heating operations
WOOD LOADING
•
The stove should be loaded manually during the functioning.
•
The loading of combustible should be done when the flame is minimum to avoid
combustion products or fumes outlet from the fire door.
•
To open the fire door, employ the fixture enclosed.
STARTING AND FUNCTIONNING
N.B . For starting never use : alcool, f uel, or others liquid combustibles.
•
In case of starting during particular cooling days or in a condition of low pressure, it’s
advisable to heat the flue before the starting, burning inside it some pieces of papers
•
For the combustible quantities please read the “ Technical Data “ .
