IS792 ECN 4879
Page 25 of 37
INFO MEANING
St
y07
on display DY1
on display DY2
The alarm occurred in 2007 (continued ...)
M03
d26
on display DY1
on display DY2
The alarm occurred on 26 March 2007
h16
d30
on display DY1
on display DY2
The alarm occurred at 4:30pm
t
8
on display DY1
on display DY2
The critical value is 8 °C/8 °F
dur
75
on display DY1
on display DY2
The alarm has lasted for 75 minutes
DY1
AH
on display DY1
on display DY2
The selected alarm
LED
L13
provides information relating to the status of the HACCP alarm memory; please
refer to section 7.1.
To exit the information series:
•press
B4
or
B6
display
DY1
will show the number of another alarm
and display
DY2
will show the corresponding code.
To exit the procedure:
•press
B12
for 5 s.
MAINTENANCE AND CLEANING
Maintenance and repair must be carried out by qualified personnel authorized by the
manufacturer.
The manufacturer declines any responsibility for jobs carried out by
unauthorized personnel or the use of non-original spare parts.
5.1 ROUTINE MAINTENANCE
Prohibited to remove the guards and safety devices:
It’s strictly forbidden to
remove guards or safety devices when performing routine maintenance operation. The
manufacturer disclaims all liability that may arise this regulation is not observed.
In case of FIRE:
-
Disconnect the unit from the electrical power socket.
- Do not use water to extinguish the fire.