IS792 ECN 4879
Page 5 of 37
WARNINGS AND PRECAUTIONS
1.1 TESTING AND INTENDED USE
This equipment is tested in compliance with established regulations and then shipped
ready for use.
“If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.”
1.2 INTRODUCTION
This manual provides all instructions required for the correct use of the equipment and to
keep it in optimal condition. It also contains important user safety information. The
following professional roles are explained in order to define individual responsibilities:
Installer
: a qualified technician who installs the equipment in accordance with these
instructions.
User
: the person who, after having read this manual carefully, uses the equipment in
accordancewith the intended specification of use described in this manual. User’s
responsibilities: ensure that the product is kept at suitable temperatures in an ambient
environment less than +40°C (104°F); be aware of the regulations governing the
conservation of products to refrigerate and to observe any whatsoever hygiene
indications that may be applicable. The user is obliged to carefully read the manual and
refer to its information at all times. Particular attention must be paid to safety warnings
(refer to Section 1.5).
Routine maintenance technician
: qualified operator able to perform routine
maintenance of theequipment by following the instructions in this manual.
Service engineer
: qualified technician, authorized by the manufacturer to perform
extraordinarymaintenance of the equipment.
The symbol
appears at certain points in the manual to draw t
he reader’s attention to
important safety information.
The manufacturer declines any responsibility in case of improper use of the equipment
deviating from the reasonably construed intended use, and for all operations carried
out that are not in compliance with the instructions reported in the manual.
This manual must be stored in an accessible and known place for all operators
(installer, user, routine maintenance technician, service engineer).
1.3 PRODUCT DESCRIPTION
The equipment comprises a single body with paneling in various materials and insulation
with expanded polyurethane foam. The equipment instruments are located on the front
panel where the electrical wiring is housed. The interior parts are fitted with suitable
supports for shelves. The doors are fitted with an automatic return device and magnetic
seal elements. During the design and construction stage all measures have been adopted
to implement total safety including radius interior corners, funnel-shaped base panel to