IS792 ECN 4879
Page 8 of 37
The drip tray must be regularly emptied; to do so, simply extract the tray from the
tracks, empty it and re-insert it back into the tracks.
Do not store explosive substances, such as pressurised containers with flammable
propellants, in this device.
1.10 MATERIALS AND REFRIGERANTS
Materials in contact or potentially in contact with products are in compliance with the
relevant directives. The equipments designed and built so that contact parts can be
cleaned before each use. The refrigerants utilized comply with established
regulations.
1.11 WARNING LABELS
Electrical Shock
LABEL A
Use of this equipment involves power supplies which convert
line voltage to low voltage power. Do not modify or use
power supplies other than OEM equipment. Connection of
the power supply may require a properly grounded
receptacle. Potential for electrical shock or equipment
damage exists if precautions are not followed.
Hot Surface
LABEL B
Avoid contact with the hot surfac
es potential for skin’s burns.
Cold Surface
LABEL C
Avoid contact with cold freezer surfaces potential for cold
burns or skin sticking to cold surfaces.
Safety Alert
LABEL D
Important operating instructions. To reduce the risk of injury
or poor performance of the unit read the user manual before
putting the equipment into operation.
Warning
Indicates an immediately hazardous situation, which if not
avoided, will result in death or serious injury.
Caution
Indicates an immediately hazardous situation, which if not
avoided, may result in minor to moderate injury
Battery
LABEL E