IS726 ECN 4530
Page 4 of 10
TECHNICAL DATA
Height (mm)
596
Width (mm)
250
Depth (mm)
570
Weight (kg)
32
Power rating(kW)
3
Current rating (A)
13
CHECK LIST OF ENCLOSURES
Warranty card
Instructions manual
Drip tray
Connection hose
Silicone drain hose assembly
INSTALLATION AND COMMISSIONING
This appliance must be earthed.
If replacing the plug connect the terminals as follows:
Green and Yellow wire Earth E
Blue wire Neutral N
Brown wire Live L
Install this appliance on a level surface ensuring all vents are unobstructed.
Only install this unit in locations where it can be overseen by trained personnel.
Inlet water pressure should be between 2 and 6 bar. (0.2MPa to 0.6MPa)
If water pressure exceeds 6bar fit a suitable pressure reduction valve.
Ambient air temperature shall be between 16
0
C and 32
0
C
Electrical supply
The unit is supplied with a 13 amp plug to BS1363.
