IS726 ECN 4530
Page 7 of 10
Insert the new filter into the recess and lock in place by twisting to the right.
Press the
“Filter life icon” and follow the on-screen instructions to reset the filter life.
Drain off approximately 5 litres of water to remove any loose carbon particles from the
filter.
The boiler will not fill if the filter is removed as the filter head incorporates a shut-off
valve.
F10-Chiller condenser over heat: This could be due to condenser fan not working,
condenser air outlet blocked or condenser blocked.
F11-Chiller- clean condenser: This is a regular periodic warning to ensure the condenser
fins are not blocked that should be kept clean to ensure optimum operation of cooler water
cooling system.
CLEANING
Do not use a water jet or steam cleaner, and do not immerse this appliance.
Clean all panels with warm water and mild detergent and do not use abrasive
materials. Dry with a soft cloth.
Slide out and empty the drip tray regularly, and wipe the dispensing tap spouts daily
to remove limescale deposits.
SPARES LIST
Part number Description
PR111
Control/Display board
PR101
Auxiliary power board
PR100
Power board
TH88
Tank over heat cut out
TH123
Steam/over flow over heat cut out
TH124
Hot tank thermistor
TH126
Cold block thermistor
WL13
Level sensor cable
CA179
Interconnect data cable
CA207
Condenser signal cable
EBCM01
Chiller module
