IS332 ECN2992
4
FLOOR STAND INSTALLATION
The floor stand must be secured to the floor with a stability bracket before
fitting the oven on the floor stand.
FITTING STABILITY BRACKET
Figure 1: Floor Bracket position.
•
Place the stand on a solid, level surface.
•
Adjust the feet on the stand so it is level.
•
Position the bracket to secure the plinth at the rear of the frame.
•
Securely fasten floorstand part no. 17789 to floor.
•
Position floorstand in place.
•
Secure with the two screws provided using the part 17790.
