IS 317 ECN 3607
Page 6 of 9
Fig 3
Add water to a level between the markers on the base plate.
Connect the appliance to an electrical supply
– the green neon illuminates to
indicate power to the appliance.
Turn the control knob to the desired setting
– the amber neon illuminates.
The amber neon extinguishes when the set temperature is reached, and then
operates with the cycling of the element.
Lower the basket of food carefully into the boiling water
– the water level will rise
considerably. After cooking place the basket into the slots provided on the basket
support and allow to drain.
Always maintain the water level between the markers, topping up with boiling water
if necessary. One kilo of pasta uses approximately 1.5 litres of water.
This appliance is fitted with a safety thermostat to cut off the power in the event of a
fault. If the green neon illuminates but the element does not heat, re-set the safety
thermostat by pushing up the red button located through the access hole in the
back panel Fig 2 (C). The appliance must be cool before the safety thermostat can
be re-set.
