IS 599 ECN 3856
Page 6 of 9
CLEANING
Do not use a water jet or steam cleaner, and do not immerse this appliance.
Clean all panels with warm water and mild detergent, do not use abrasive materials
or cleaners containing chlorine. Dry with a soft cloth.
Scale
The formation of scale within a hot water system is common, and if left unchecked it
may cause problems to the functioning of the appliance. Check for scale build-up
frequently and de-scale as necessary.
De-scaling
Excessive scale may be difficult to remove
– we recommend using approved
de-scaler MS19, available from Lincat.
To de-scale the appliance, first disconnect from the electricity supply.
Remove all gastronorm pots from the tank and fill the tank with water to the
indicated level.
Heat the water to boiling and then turn the thermostat off.
Add the de-scaling agent a little at a time, allowing the froth to subside. Some de-
scaling compounds may cause hot water to erupt
– follow the manufacturer’s
instructions.
Heat the appliance again for 30 minutes before allowing it to cool.
Repeat the process if necessary.
On completion of successful de-scaling, isolate the appliance from the supply, drain
the tank via the drain tap and rinse with clean water.
