IS355 ECN3592
5
NOTE
CHECK LIST OF ENCLOSURES
Please ensure the following items are included with this piece of equipment:
Model
DF4
DC04
Tick
Warranty Card
1
1
Connection Nipple (1/2" BSP)
1
1
User Instructions
1
1
SERIAL NUMBER
Each appliance manufactured at Lincat has a unique identifying number found in
the top right hand corner of the data plate attached at the rear of the appliance.
Please record that number in the space provided should it be required for future
reference.
Serial Number
MARK OF CONFIDENCE
Every singe product that leaves our factory bears a serial plate showing the
assembler
‟s initials. It‟s a mark of confidence we have in our people and our
manufacturing process.
INSTALLATION
SITING
The installer must ensure that all regulations are met and that there is an unobstructed
minimum distance of 750mm from the top of the flue to the ceiling, which must be of non-
combustible material.
This appliance is supplied with feet that should be fitted when it is to be mounted on either
a counter top or tabletop.
If it is to be mounted on to a pedestal or stand, the feet should not be fitted and only open
fronted pedestals, e.g. model CN4 or stand SLS4 should be used.
Any partitions, walls or kitchen furniture in close proximity must be of non-combustible
materials and not be closer than 50mm from the sides and rear of the flue.
INSTALLATION COMMISSIONING.
To ensure a full understanding of the correct operation of the appliance the following
commissioning checks must be carried out before the appliance is handed over for use.
All operators must know how to light, safely operate and shutdown the appliance.
Although all Lincat fryers are operationally checked during manufacture, commissioning
shall include an operational check of all controls and a calibration check on the thermostat.
The oil temperature should be checked once the main burner has cut-out for the second
time
.
Summary of Contents for Silverlink 600 DC04
Page 20: ...IS355 ECN3592 Notes...
