IS212 ECN3592
2
INSTALLATION AND SERVICING
INSTRUCTIONS
Please read the following carefully before commencing work on this unit.
WARNINGS AND PRECAUTIONS
This appliance must be installed by a competent installation engineer in accordance with the
installation instructions, and should conform to the following requirements:
Gas Safety (Installation & Use)
Regulations
BS 5440: Flues, Air Supply for gas
appliances of input not exceeding
70kW (1
st
, 2
nd
and 3
rd
family gases)
Institution of Gas Engineers
publications: IGE/UP/1, IGE/UP/2
and IGE/UP/4
BS 6173: Code of Practice for
Installation of Gas Catering
Appliances
Local and National Building
Regulations
Fire Precautions Act
Health & Safety At Work etc Act
It is mandatory that all appliances are installed, commissioned and serviced by a qualified and
competent person as defined by the regulations in force in the country of installation.
Failure to comply will invalidate the warranty.
WARNING:
All equipment must be earthed to prevent shocks
Do not obstruct or block the appliance flue
Do not connect directly to any flue, ducting or mechanical extraction system
Installation should allow for a sufficient flow of fresh air for combustion air supply
Installation must include sufficient ventilation to prevent the occurrence of unacceptable
concentrations of substances harmful to health in the room in which they are installed
It is recommended that this appliance is sited under an extraction canopy for the removal
of combustion products
Parts which have been protected by the manufacturer or his agent must not be adjusted by
the installer or user
