IS 358 ECN 3592
9
a
c
g
f
e
d
OPERATING INSTRUCTIONS
Note: Lids must not be used when cooking is in progress
.
Fig 2.
a.
Thermostat knob
b.
Control valve
c.
Pilot
d.
Limit reset location
e.
Drain valve blanking cap
f.
Drain valve lock
g.
Drain valve handle
LIGHTING of the APPLIANCE.
Please ensure that the gas isolation valve for the appliance is turned to the open position before
attempting to light this unit.
1.
Ensure that the thermostat control knob
(Fig 2, a)
is in the OFF position.
2.
Open the door and locate the control valve
(Fig 2, c).
3.
Ensure the pilot control knob is in the off position
(Fig 3, 1).
Push in and turn anti-clockwise to the Pilot
position
(Fig 3, 2).
The knob will now depress further.
4.
Keeping the pilot control knob depressed, press the piezo ignition button
(Fig 3, 3).
5.
Ensure the pilot is alight, a blue flame can be seen at
(Fig 2, c).
Hold the pilot control knob in for 20
seconds to establish the pilot flame.
6.
When the pilot is lit, release the pilot control knob and turn fully anti-
clockwise to the „Main Burner‟
position
(Fig 3, 4)
.
7.
If the pilot flame fails to remain lit, return the pilot control knob to the off position and repeat the
process allowing a short period of time for the control to reset.
8.
To operate the main burner, turn the thermostat control knob
(Fig 2, a)
to the required temperature
setting.
Fig 3
1
2
3
4
b
