15
LINCE ITALIA S.p.A.
3.8 SETTINGS
With this menu you can change the keyboard settings such as:
•
Brightness
by cursor;
•
Timeout
indicates how long the keyboard display automatically turns off (NEVER, 30 s, 60 s, 90 s,);
•
Volume
allows you to set the volume of the keypad buzzer;
•
LED luminosity:
by means of a slider it is possible to adjust the brightness of the signaling LED
;
•
Insert code:
it is used to set the code input when using favourites;
•
Delay logout:
allows you to exit from the initial screen and return to the menu without the need to enter the access code again,
on the lower left corner the word “AUTHENTICATE” appears and disappears autonomously after 10 seconds of inactivity
•
Emergency lamp:
is used to enable the function;
•
Doorbell:
if in the system there is at least one zone set as a bell, the keypad emits a sound every time that zone is opened;
•
Beep I/O:
enable or disable the buzzer sound on the arming of delayed inputs;
•
Reset options:
returns the options to the default settings;
•
Languages
: allows you to select between English and Italian;
•
Show Alarm:
if enabled by choosing “YES” from the drop-down menu, in the event of an alarm, a message will be displayed with
the input that generated the alarm and the possibility of disarming (with code) or not the system will be offered.
Press ”>” to go to the second page and “<” to return to the previous page.
16:29
Fig. 30
VOLUME
TIMEOUT
BRIGHTNESS
30 s
>
LUM. LED
16:29
Fig. 31
DELAY LOGOUT
INS. CODE
NO
YES
<
DOORBELL
EMERGENCY LAMP
NO
NO
>
16:29
Fig. 32
RESET OPTIONS
BEEP I/O
NO
<
RESET
LANGUAGES
ENGLISH
SHOW ALARM
NO
