8695 6650 / C
F-20
POSIMATIC PS30
F - MAINTENANCE
1 - SERVICING
For the machine to continue to provide good service for as long as possible, a certain minimum of care and
maintenance is necessary.
Before working on the machine, it is
MANDATORY
to lock out all the
supplies of utilities to the machine (electricity, air, gas etc.).
Locking an emergency stop button is not sufficient.
LUBRICATION
The reducing gear of
POSIMATIC
are lubricated with oil. They are provided with level control windows, filling plugs
and drain plugs.
This reduction gears can operate at an ambient temperature from 0°C to +40°C.
The bearing of the positioning ring is lubricated with grease.
External cogging is lubricated with grease.
CONTROL AND SAFETY
All the instructions in this manual must be followed closely, particularly those relating to the limits of use.
Further, the main parts of the equipment, particularly the coggings, the screws and nuts, power cables of motors
and remote control, motor ventilation etc., must be inspected periodically.
After a long time of unusing the positioner, all the periodical controls should be done before restarting.
