A-5
INSTALLATION
ASPECT™ 375
OUTPUT CONNECTIONS
FIGURE A.4
The ASPECT™ 375 is equipped with Twist-Mate style front output
studs. To connect cables, turn the power switch ”OFF.” Connect
the torch Twist-mate plug into the electrode gas output receptacle
on the front of the machine and turn clockwise until tight. This
quick connect terminal also provides the gas connection for the
shielding gas to the torch.
Refer to the following connection diagrams for specific information
on connecting water cooled and air cooled torches.
TWIST-MATE
ELECTRODE / GAS
OUTPUT STUD
TWIST-MATE
WORK STUD
6-PIN REMOTE
CONTROL CONNECTOR
15VDC SUPPLY
Pin
A
B
C
D
E
F
Wiring
77 Remote potentiometer, 5K
76 Remote potentiometer, wiper
75 Remote potentiometer, common
Trigger, common
Trigger, input
Ground
Function
6-pin remote
control con-
nector for
remote or
hand/foot
amptrol.
A
E
C
F
B
D
6-PIN REMOTE CONTROL CONNECTOR