C-1
ACCESSORIES
GENERAL OPTIONS /
ACCESSORIES
Field Installed
K870 - Foot Amptrol
™
for TIG welding. The foot Amptrol ener-
gizes the output and controls the output remotely. The Foot
Amptrol
™
connects directly to the 6- pin remote control connector.
K963-3 - Hand Amptrol
™
for TIG welding. The Hand Amptrol
™
energizes the output and controls the output remotely. The Hand
Amptrol
™
connects directly to the 6-pin remote control connector.
K814 - Arc Start Switch -
Energizes the output for TIG welding if
remote output control of the amperage is not desired. It allows
on/off TIG welding at the amperage set by the Current Control on
the control panel.
K3950-1 - Cool-Arc
®
47 Water Cooler-
Attaches underneath the
ASPECT™ 375 and electrically connects to the ASPECT™ 375.
This smart cooler runs only when needed and shuts off welding if
coolant flow is interrupted.
K3949-1 TIG Inverter Cart-
Holds the ASPECT™ 375, the Cool
Arc
®
47 and all accessories. Features low lift bottle loader and
drawer for convenient storage.
K918-1 Zippered cable cover, 12.5 ft. (3.8 m)-
to protect torch
cables in high abrasion applications.
K918-4 Zippered cable cover, 25.0 ft. (7.6 m)-
to protect torch
cables in high abrasion applications.
Regulator with Flow Gauge and Hose Kit (3100211)
K2266-1 – TIG-Mate
™
17 Air Cooled TIG Torch Starter Pack.
One complete easy-to-order kit packaged in its own portable car-
rying case. Includes: PTA-17 torch, parts kit, Harris
flowmeter/regulator, 10 ft. gas hose, Twist-Mate™ adapter, work
clamp and cable.
Magnum
®
TIG Torches –
The following standard Magnum
®
TIG
torches may be used with the ASPECT™ 375 for Lincoln’s full line
of TIG torches including flex head models consult publication
E12.150.
• K1782-1 PTA-17 12.5 ft.(3.8m) Air-Cooled 150A
• K1782-3 PTA-17 25 ft.(7.6m) Air-Cooled 150A
• K1783-1 PTA-26 12.5 ft.(3.8m) Air-Cooled 200A
• K1783-3 PTA-26 25 ft.(7.6m) Air-Cooled 200A
K4168-2 20H-320-25R 320 Amp Water Cooled Torch with
Cable Cover.
K1622-5 Twist-Mate
™
Adapter -
Adapter needed for K4168-2
and K1784-2 torches
NOTE:
Each torch requires a Twist-Mate
™
Adapter, collets, collet
bodies, and nozzles and are not included and must be ordered
separately.
KP509- Magnum
®
parts kit for PTW-18 and PTA-26 series torches.
KP510- Magnum
®
parts kit for 20H-320-25R series torches.
K1803-3 -
Work Lead Clamp with Twist-Mate
™
plug, 15ft.(4.6m).
KP4159-1 Low Conductivity Coolant (1 Gal.)
K1622-3 Twist Mate Adapter for PTA-26 TIG Torch
K1622-1 Twist Mate Adapter for PTA-17 TIG Torch
ASPECT™ 375