B-8
OPERATION
B-8
EMPTYING THE DUST TRAY
Dust and dirt particles from the main filter end up in the
dust tray underneath the machine. To avoid dust tray
overflow thus polluting the workshop, it needs to be
emptied on a regular basis.
See Table D.1
in the
Maintenance Section
for the frequency of emptying.
See Figure B.7
for steps 1-5
1. Loosen the star knob (B), which is accessible from
the underside at the back of the machine.
2. Carefully take out the dust tray (A).
The dust tray can be emptied in different ways:
- Using an industrial vacuum cleaner (preferred way);
or
- Empty in a plastic bag.
3. Empty the dust tray. In case of emptying it in a plas-
tic bag, make sure to seal the bag firmly.
4. Slide the dust tray back into the machine.
5. Carefully tighten the star knob making sure that the
dust tray is sealed airtight.
MOBIFLEX 400-MS(/HE) BASE UNIT & LFA 3.1/4.1 MOBILE MANUAL/AUTOMATIC
Always wear face mask and gloves
when emptying the dust tray.
------------------------------------------------------------------------
ATTENTION
Never open the dust tray while the
motor is running.
------------------------------------------------------------------------
WARNING
FIGURE B.7
B
A
