English
English
9
Interface Description
Table 2. Interface Components and Functions
v
min
m
125
A
22.5
V
1.2
Steel
ArCO2
21
10
9
7
11
12
25
26
27
28
28.6
5.51
Figure 6.
Functions of Interface
Components
7. Cancel / back.
9. Changing Parameter Value
[25].
10. Changing Parameter Value
[26].
11. Selection and changing the
Welding Settings.
12. Change Confirmation.
25. The Parameter Value in the
upper left side of display.
26. The Parameter Value in the
upper right side of display.
27. Welding Parameters Bar.
28. Welding Program.
Welding Parameters Bar
The Welding Parameters Bar enables:
••••
Welding Program change.
••••
Wave Control Value change.
••••
The gun’s trigger function change (GMAW,
GMAW-P, FCAW, STT, GTAW only).
••••
Add or hide functions and welding parameters – User
Settings
Table 3. SMAW Welding Parameters Bar – factory
default
Welding Process Choice
Arc Force
A
Hot Start
(SMAW Soft and SMAW Crisp only)
User Settings
Table 4. Gouging Welding Parameters Bar – factory
default
Welding Process Choice
User Settings
Table 5. GTAW Welding Parameters Bar – factory
default
Welding Process Choice
A
Hot Start
The function of the gun’s trigger change
User Settings
Table 6. GTAW-P Welding Parameters Bar – factory
default
Welding Process Choice
Frequency Settings
Background Settings
A
Hot Start
The function of the gun’s trigger change
User Settings
