English
English
27
USB Memory (PF46 only)
When USB Memory Stick is connected to the USB
Receptacle [21], USB Menu appears on the display.
Figure 52.
The following data can be save on a USB Memory Stick
or loaded from the USB Memory Stick:
Icon
Description
Settings
Configuration Menu (Setup)
M
All welding programs stored in user
memory
M1
One of the welding programs
To save the data on a USB Memory Stick:
•
•
Connect a USB Memory Stick to the USB
Receptacle [21].
•
•
Use the Set Control [11] to highlight the Check Mark
icon.
Figure 53.
•
•
Press the Right Button [12] to confirm the USB
Memory Stick selectrion.
•
•
Use the Set Control [11] to highlight the Save icon.
Figure 54.
•
•
Press the Right Button [12] to confirm the save on a
USB Memory Stick.
•
•
Create or chose a file in which will be saved copies
of the data. "+++" mark means a new file.
Figure 55.
•
•
The display shows the Save Data Menu on a USB
Memory Stick. In this case, a copy data will be saved
in the file LEB1.WMB.
/LEB1.WMB
M1
M4
M5
M8
M2
M3
M6
M7
M9
M
Figure 56.
•
•
Use the Set Control [11] to highlight the data icon
which will be saved in the file on a USB Memory
Stick. For example: Configuration Menu icon.
M
/LEB1.WMB
Figure 57.
