English
English
6
WARNING
Maximum coolant pressure is 5,0 bar.
To ensure failure-free work and right flow of coolant,
use only coolant that is recommended by the
manufacturer of welding gun or cooler.
18. Gas Flow Regulator Plug: Gas Flow Regulator can
be purchased separately. See "Accessories"
chapter.
19. Cold Inch / Gas Purge Switch: This switch enables
wire feeding or gas flow without turning on output
voltage.
20. Lighting Switch.
21. USB Receptacle: To connection the USB memory.
18 19
22
24
20
23
Figure 4.
18 19 20 21
22
23
24
Figure 5.
22. Wire Spool Support: Maximum 15kg spools.
Accepts plastic, steel and fiber spools onto 51mm
spindle. Also accepts Readi-Reel
®
type spools onto
included spindle adapter.
WARNING
Be sure that wire spool case has to be completely
closed during welding.
23. Spooled Wire: The machine does not include a
spooled wire.
24. Wire Drive: 4-Roll wire drive.
WARNING
The wire drive door and wire spool case have to be
completely closed during welding.
WARNING
Not use handle to move the machine during work. See
"Accessories" chapter.